30 TON TWO STATION HYDRAULIC PRESS HSP-30M-C
Hydraulic Presses
.jpg)
With its additional work station, sturdy plate steel construction and piston-style hydraulic pump, this hydraulic H-frame press offers one of the best values on the market.
30-ton capacity on main press.
10-ton capacity on side press.
27.5” working width.
5.74” diameter cylinder with 9.8” stroke on main press.
2.76” diameter cylinder with 7.75” stroke on side press .
3 hp motor runs on 200-volt single-phase power.
Main cylinder can move left and right within the frame to deliver pressure at the point where you need it for off-center projects.
Comes standard with dual pressure gauges.
Includes 2-piece V-block.
Fully-welded steel frame
THE PRESS Enables you to use the machine’s force at full capacity without worrying about flexing.
Baileigh covers this hydraulic shop press with a 1-year parts warranty as well as lifetime technical support by phone.
| Tonnage | 30 T |
| Stroke | 9.8" |
| Daylight | 18" |
| Power | 3 hp |
| Bed W | 28" |
| Bed L | 12" |
| IPM | 0 ipm |
| Dimensions | 78 x 48 x 80 |
| Weight | 1200 |
Item Number HSP-30M-C
Return Speed .30" / sec. (Main), .60"/ sec. (Side)
Motor 3 hp
Piston Head Diameter 2" (Main), 1.97" (Side)
Pump Speed .95 gal/min
Oil Capacity 13 gal.
Included Accessories Included Accessories
Working Speed .25" / sec. (Main), .78" / sec. (Side)
Working Width 27.25"
Maximum Capacity 30 ton (Main), 10 ton (Side)
Cylinder Stroke 9.8" (Main), 7.75" (Side)
Cylinder Movable Yes (Main)
Cylinder Diameter 5.74" (Main), 2.76" (Side)
Distance From Table To Ram Min. 8.25" - Max. 40.25" (Main), Min. 7.25" - Max. 43.25"
Power 220 Volt Single Phase
Shipping Weight 1060lbs
Shipping Dimensions (Inches) 78 x 48 x 80
30-ton capacity on main press.
10-ton capacity on side press.
27.5” working width.
5.74” diameter cylinder with 9.8” stroke on main press.
2.76” diameter cylinder with 7.75” stroke on side press .
3 hp motor runs on 200-volt single-phase power.
Main cylinder can move left and right within the frame to deliver pressure at the point where you need it for off-center projects.
Comes standard with dual pressure gauges.
Includes 2-piece V-block.
.png)