2021 HAAS DM-2 CNC VERTICAL MACHINING CENTER , $55,500.00 , 15,000 RPM, CAT 40 , OIL SKIMMER
Have one to sell?
ConditionUsed
1 available
$55,500.00 USD
Or as low as $1,110.00 USD/month over 60 months
Or as low as $1,110.00 USD/month over 60 months
DM-2
2021 Haas DM-2 CNC Vertical Mill, Oil Management SDPC Pneumatic Skimmer, Travels 28.0" x 16.0" x 15.5", Table Size 34.0" x 15.0",
Spindle Speed 15,000 RPM,
Spindle Power 15.0 HP,
Control Haas Next Gen Control (NGC),
Oil Management SDPC Pneumatic Skimmer
The DM-2 is a compact, high-speed machining center built with proven Haas components and sub-assemblies. It is identical in construction and specifications to the DM-1, with the addition of 8" of X-axis travel and table length. The machine’s shop-proven 40-taper inline spindle, 18+1 tool changer, high acceleration rates, fast rapids, and impressive short tool-change times make the DM-2 an attractive high-productivity machining center.
The DM-2 allows shops to use their existing 40T tooling and enjoy the benefits of a larger spindle, and its lean-style, compact footprint makes very efficient use of valuable shop floor space.
More X-axis travel and longer table than the DM-1
Powerful 40-taper inline direct-drive spindle
High-productivity machining center with a compact footprint
Optional 15,000-rpm Spindle
Optional Oil Skimmer
Tool Changers Standard 18+1 Side-Mount Tool Changer
Chip & Coolant Management Standard
55-Gallon Coolant Tank
Standard Single-Stage Coolant Pump
The Haas Control Standard
Control Widescreen Monitor Standard
Ethernet Interface Standard
WiFi Connection for the Haas Control Standard
Power Surge Protection Standard
Early Power-Failure Detection Module Standard
ECO Mode Standard
Advanced Tool Management Standard
Media Display M-Code; M130 Standard
HaasConnect: Remote monitoring Standard
Safe Run Standard
HaasDrop Standard
Rigid Tapping Standard
Standard Program Memory, 1 GB
DM-2
2021 Haas DM-2 CNC Vertical Mill, Oil Management SDPC Pneumatic Skimmer, Travels 28.0" x 16.0" x 15.5", Table Size 34.0" x 15.0",
Spindle Speed 15,000 RPM,
Spindle Power 15.0 HP,
Control Haas Next Gen Control (NGC),
Oil Management SDPC Pneumatic Skimmer
The DM-2 is a compact, high-speed machining center built with proven Haas components and sub-assemblies. It is identical in construction and specifications to the DM-1, with the addition of 8" of X-axis travel and table length. The machine’s shop-proven 40-taper inline spindle, 18+1 tool changer, high acceleration rates, fast rapids, and impressive short tool-change times make the DM-2 an attractive high-productivity machining center.
The DM-2 allows shops to use their existing 40T tooling and enjoy the benefits of a larger spindle, and its lean-style, compact footprint makes very efficient use of valuable shop floor space.
More X-axis travel and longer table than the DM-1
Powerful 40-taper inline direct-drive spindle
High-productivity machining center with a compact footprint
Imperial
| Power | 15 hp |
| X | 28" |
| Y | 16" |
| Z | 15.5" |
| Spindle Speeds | 15,000 RPM |
| Electrical Requirement | 240/440 v 3 phase |
| RPM | 15,000 RPM |
| # ATC | 18 |
| Taper | 40 |
| Table-W | 15" |
| Table-L | 34" |
| Table Load Capacity | 650 lb |
| # Axis | 3 |
Optional 15,000-rpm Spindle
Optional Oil Skimmer
Tool Changers Standard 18+1 Side-Mount Tool Changer
Chip & Coolant Management Standard
55-Gallon Coolant Tank
Standard Single-Stage Coolant Pump
The Haas Control Standard
Control Widescreen Monitor Standard
Ethernet Interface Standard
WiFi Connection for the Haas Control Standard
Power Surge Protection Standard
Early Power-Failure Detection Module Standard
ECO Mode Standard
Advanced Tool Management Standard
Media Display M-Code; M130 Standard
HaasConnect: Remote monitoring Standard
Safe Run Standard
HaasDrop Standard
Rigid Tapping Standard
Standard Program Memory, 1 GB
We use cookies to improve your experience. Privacy Policy.